A step-by-step guide to hand washing your car

A detailed quick guide to palm cleaning your cars and truck.

Hand cleaning an auto outside requires to become performed with treatment and also the best items. As cars and truck pros, our team highly recommend observing this detailed quick guide to palm cleaning your cars and truck without leading to scrapes as an auto washout carries out.

Just before starting, our team desire to highly recommend being sure you possess the items coming from the What you are going to require listing. Our experts cannot stress enough how important it is never to dry wipe and when it comes to removing particles stuck to the exterior to remove it with the correct soaps, brushes, and mitts. If you dry wipe you will damage the topcoat by rubbing the particles such as salt, dirt, or dust into the exterior and therefore damage the exterior as well as the Ceramic Coating (if you have applied one).

First begin with washing down the entire car, including wheels, with a hose. that couldn´t be completely removed before. Hose the foam off. Optional: lather the exterior is foam soap to assist in removing any other contaminants.

Then proceed with washing the wheels and tires. This prevents any particles on the wheels from water splashing onto the car exterior. Make sure to use a separate wash and rinse bucket for the wheels and car. When it comes to washing the wheels , check out this blog article to our top tips and techniques.

WHAT YOU WILL NEED:

-Foam soap (optional)

-A leaf blower (optional)

1. Fill one bucket with water and soap and the other will plain water. Place Microfiber mitt into the bucket with soap and water.

2. Start washing from top to bottom, beginning with the hood.

Most of the particles and debris will be on the bottom of the car, this is one of the motivations for using the top to bottom technique.

Begin with washing one side of the car, front to back, then later move onto the second half. Grab your microfiber mitt and do certainly not scrub or apply too much pressure. Simply use the weight of the mitt and rub lightly on the surface.

3. Flip the mitt over and begin to wash from the windshield to the roof of the car moving to the back.

PRO TIP: After washing a section, rinse the mitt off to remove collected dirt and debris.

4. Dry the exterior.

We highly suggest that when drying the exterior with a microfiber towel that you lubricate it with car wax, or Ceramic Coating spray to ensure that you do not leave any swirl marks, and also give an extra layer of protection to the surface.

One way to ensure that the car is actually completely dry out is using two towels for this process. One towel is used to soak up all the excess water and also the other is used to double-check, making sure the surface is perfectly dry.

Our top tip when it pertains to drying the outside without leaving watermarks or droplets is to use a leaf blower to blow dry out the cars and truck.